Deep Water Icone

The Deep Water Icone is a pressure-compensated digital cone designed for highly accurate bottom Cone Penetration Tests (CPTs) at depths of 500 to 4,000 meters below sea level. Thanks to pressure compensation, the cone measures reliably relative to the local hydrostatic pressure, with high accuracy across the entire depth range.

The Deep Water Icone is a pressure-compensated digital cone designed for highly accurate CPT's at depths of 500 to 4,000 meters below sea level.

Reliable at great depths

Hydrostatic pressure increases with depth. Although the standard Icone measures reliably up to approximately 1,500 meters, the variations in water pressure at greater depths become too small in relation to the sensor range. The Deep Water Icone has been specifically developed to accurately measure excess pore pressure at great depths โ€“ essential for offshore foundation investigations and oil and gas installations.

Like the standard Icone, the Deep Water Icone measures four parameters: cone tip resistance (qc), sleeve friction (fs), pore water pressure (u2) and inclination (Ix/y).

Compatibility

The Deep Water Icone can be used with all ROSON and WISON-APB wireline CPT systems. For deep-sea applications, we recommend using the Deep Water ROSON and the WISON-APB-3000.

A.P. van den Berg has been supplying innovative CPT solutions for offshore soil investigations since the 1980s. The Deep Water Icone is part of the digital Icone system, consisting of the Icontrol data logger and Ifield software for real-time data processing.

Technical specifications Deep Water Icone

FeatureNominal / Maximal range
Cone tip resistance (qc)75 / 150 MPa
Sleeve friction (fs)ย 1 / 1,5 MPa
Pore water pressure (u2)ย 2 / 3 MPa
Inclination (lx/Iy)ย 15 / 25ยฐ
Resolution24 bits (inclination 16 bits)
Memo function16 Mbit (for approx. 8 hours of CPT’s)
Cone10 cmยฒ

Deep Water Icone in the spotlight

Want to know more about the possibilities?

Interested in our Deep Water Systems, modules, or Ifield CPT software?

ROSON-3D-ST seabed CPT system including seismic module. Made by A.P. van den Berg.

ROSON-ST for safe and fast CPTs

ACSM uses the ROSON-3D for geotechnical soil investigations on the seabed.

ROSON-3D with 200 kN pushing force

ROSON-2D with a pushing force of 140 kN for nearshore, offshore, and deepwater applications.

ROSON-2D with 140 kN pushing force

Shown here is the cone used with the WISON-APB-3000, a wireline CPT system designed for water depths of up to 3,000 m.

WISON-APB-3000

Ifield is a software package that comes pre-installed on every Icone CPT system from A. P. van den Berg.

Ifield CPT software

The click-on modules of A.P. van den Berg: Vane, Magneto, Conductivity and Seismic.

Click-on modules

Want to know more about our CPT data systems?

Discover which CPT data systems and click-on modules are best suited for your situation. Contact Irina Antonova, our Commercial Sales Representative, for expert advice, specifications, and quotations.

Contact us
Irina Antonova - Commercial Sales Representative at A.P. van den Berg