|
The wide range of cones is suitable for use on land as well as offshore.
Mechanical jacket cone
For measuring cone tip resistance and total resistance
Mechanical friction jacket cone
For measuring cone tip resistance, cone tip resistance + local friction and total resistance
Elektrical cone ELC5
Cone tip area 5 cm²
Friction sleeve area 75 cm²
Electrical cone ELC10
Cone tip area 10 cm²
Friction sleeve area 150 cm²
Electrical cone ELC15
Cone tip area 15 cm²
Friction sleeve area 275 cm²
Measuring principles: compression or subtraction.
Standard geotechnical parameters: cone tip resistance qc, local friction fs.
Pore-water pressure U, standard filter positions: in the cone tip, behind the cone tip, other positions on request.
Inclination: in the cone tip or in separate adapter behind the cone.
Specifications (compression principle)
qc
Range:
50 MPa nominal
100 MPa maximum
Accuracy:
standard: 0,1 MPa
Class 1: 0,05 MPa (NEN 5140)
fs
Range:
0,75 MPa nominal
1,5 MPa maximum
Accuracy:
standard: 0,010 MPa
Class 1: 0,005 MPa (NEN 5140)
U
Range:
1,0 MPa nominal
2,0 MPa maximum
Accuracy:
standard: 0,010 MPa
Class 1: 0,005 MPa (NEN 5140)
I in separate adapter
Range:
15° nominal
16° maximum
Accuracy:
2°
I, X-Y in the cone tip
Range:
-20° to +20° nominal (2 directions)
-22° to +22° maximum (2 directions)
Accuracy:
0,5° Leaflet mechanical and electrical cones
|
